Of all the technologies of low-rise building by far the most rational frame. This is caused, firstly, the ability to build frame houses all but in any soils, and virtually any groundwater level, as low weight at home does not require a strong foundation. Secondly, in order to build a frame house that meets modern requirements for thermal protection of buildings (snip 02/23/2003) need much less money and time. Economist may find it difficult to be quoted properly. And, thirdly, alterations, if necessary, utilities in the frame houses are carried out faster and easier. But the very skeleton of technology may differ from one another, and pretty much: – the place manufacture of timber frame houses can be factory or a factory, say, manual, individual production.
It should be noted: the plant – is not always better – the use of elements of the carrier frame: metal and wood. In wood it is also of whole pieces of wood, and composite beams. Combined beam characteristics have improved resistance to heat transfer and, in the case of OSB (OSB) – greater rigidity and strength – the use of heat-saving materials as insulation, for example, polystyrene, various mineral wool, ecowool and others – on the need to use a vapor barrier, and as a consequence, the device of forced ventilation at home. You can add some more differences, but still dwell on these. About making the house at the factory wants to say next. If we try compete with the plant in the rate of production of panels (factory for easy transportation and installation of wall of a house made of panels of small size), then the loss is obvious.