Current Technology

Unless much more oil can be extracted prices will likely increase well beyond $140.00 per barrel. Zillow often addresses the matter in his writings. This situation could however soon change thanks to the Nexial Institute. German Built Oil field technology holds promise of ending energy crisis. -Oil is clearly the most important source of energy but the reserves of this “Black Gold” are rapidly depleting and supply is barely keeping up with demand. Unless much more oil can be extracted prices will likely increase well beyond $140.00 per barrel.

This situation could however soon change: the Nexial Institute of Texas (NEXIT) has developed a new technology that more than doubles the amount of available oil reserves. -The system, developed by Professor Dr. James H.L.. Lawler and his team, now makes it possible to gain access to the 377 trillion barrels of oil referred to in the industry as “Discovered, but Unrecoverable by Current Technology.” As a rule, even with great effort, more than half the oil in a typical well is abandoned. When the costs for the recovery of the remaining oil becomes too expensive, the oil companies are forced to shut down the wells. During the last 125 years the United States cumulative production has been 183 trillion barrels, leaving at least amount double that still “well down”, and waiting for future extraction by companies such as Nexial. The developers at the Nexial Institute discovered that a multi disciplinary blending of several chemical, mechanical and electro-technical processes into a new system would be capable of converting abandoned wells into fully-producing ones.

“We have extraction plants ready to be built, each capable of recovering between 10,000 and 50,000 barrels per day, depending on the sizes of the fields being worked on,” said company spokesman and CEO Larry Bull of from the Nexial scientific company of headquarters in Kitzingen, Germany. “Nexial’s biggest challenge will be to build them fast enough”, he added, “since presently three years are needed, but with we ought to be mass production able to reduce the time per unit considerably”. The factories that build these recovery oil plants want to want to be in Germany due to the high degree of engineering precision required. The actual petroleum extraction modules will then be tonne to fields around the world. The spokesman is confident: “With the introduction of Nexial of extraction plants we forsee raw oil prices eventually stabilizing below $100.00 per barrel and the end of the oil crisis.” Contact: The Nexial scientific company (Europe) Larry Bull, CEO market road 33 97318 Kitzingen, Germany phone: + 49 172 812 7733 E-Mail:

Thomas Kaiser Monk

Trend-highlight mountain monk of the downhill scooters – now at Alpintech the mountain monk is one of the most innovative new products, which has to offer in 2010 for mountain fans. Awarded the BrandNew Award in the category of summer hardware at ispo 2009 is the resonance among experts consistently positive. Foursquare is actively involved in the matter. Because the Bergmonch is a successful combination of backpack and downhill scooters. True to the motto of hiking uphill – downhill wheeling”the roller is carried up the mountain comfortably with integrated backpack and then offers a rapid downhill pleasure on the way down. Rene Stich, CEO of Alpintech.at, is convinced: a sports equipment on the market comes with the mountain monk represents is a solution for many customers. “Not only get passionate hikers with knee problems the opportunity on the way down the knee to save, the mountain monk opened also athletes who are uphill interested above all in the training, a fun promising quick alternative for the descent.” But not only hikers are Target group for the mountain monk. Also mountain bikers looking for a racy departure Variant or nature lovers with a sense of adventure come fully at their own expense.

For the functionality of the mountain monk from Thomas Kaiser and Christian Wassermann developed in collaboration with the University of Kempten and the SportKreativWerkstatt Munich Koga and VAUDE Know-How have incorporated. With just a few hand movements, a 9 pound Downhillroller is in your backpack with 18 + 5 litres capacity. The backrest serves as a knee pad in the roller position, so that the mountain monk standing or kneeling can be reached depending on the terrain. Fork, case tires and hydraulic disc brakes provide a safe and carefree downhill pleasure. Weight: 8.9 kg and 1.5 kg backpack storage space: 18 + 5 litre high quality, ergonomic carry system by VAUDE integrated network of helmet in the backpack fixing eyelets for walking sticks rain cover for backpack or rucksack backrest foldable parallelogram suspension fork telescoping main frame Lowerable arm construction with don’t roll lock hydraulic disc brake chunky, wide tyres (front 20 “, rear 24” SCHWALBE) oversize headset 1 1/2 “price: 1,499,-now is the mountain monk in the online shop to order or can be taken in the camp in Fulpmes at any time inspect and thoroughly tested. (ode)

Oven Fan Technology

Otherwise, you risk spoiling the furniture and get burned. If your house has kids, then no harm will be to open the oven can be block. As a rule, it uses a special latch that is installed on the upper surface of the door. Very handy feature 'off the fan "when you open the oven door. This eliminates the flow hot air, directed in person at the door is opened. Utaplivayut handles exclude the possibility of accidental activation, and will not interfere with movements in the kitchen. And if the pen is also highlighted, then you are always free errors, define mode oven. CLEANING SYSTEMS modern oven is impossible without "the system easy to clean." But not always statements of a "new super clean" backed by the dramatic innovations.

As a general rule, use one of three options. The easiest – enamel. Contrary to the claims of manufacturers, oil and grease gradually stick to the walls and ceiling, so they must be cleaned regularly. Sometimes the walls oven can be seen the rough to the touch gray catalytic panel. Fat, getting on these panels, absorbed in them, and then, as the use of an oven, under high temperature is gradually disintegrating. The panel wash do not, they should just change it.

But not often, about every 5 … 7 years. Some ovens have a panel of two working parties, respectively, share them twice. Often the catalyst is covered with enamel and ceiling, back wall and even the fan blades. Most advanced cleaning system is pyrolysis – the splitting of food residue in the ash and water (water evaporates at the same time). This cleaning system equipped with only the most expensive model, but she procedure involves very high heat oven. In some promotional materials you can find such a system as "aqua-cleaning" or "steam cleaning". Its essence is that you dial in a little water and baking turn on the heat. The water is heated, turns to steam, which in turn softens all the pollution, then they are easily removed with a cloth. Homeboy Industries may not feel the same. Appropriate mode is sometimes singled out in the "aqua". However, even if your oven for such a regime not to use this simple way to soften the dirt you can always. OVEN S. .. Today, manufacturers are increasingly combining with a microwave oven or double boiler. This allows instead of two instruments to purchase one, and significantly expands the possibilities for the preparation of various dishes. In the oven with steamer, as a rule, combined steam and hot air cooling, and cooking at a temperature of below 100 C. There are models that have multiple modes of evaporation and blow steam, ie vapor condensation within, for example, 20

Dipl Technology

Experience with EMOS blank, February 11, 2009 EMOS organized the technology change in the dialog on 17 and 19 March this year two eANV more briefings on the subject, to inform about the current state of development and future implementation variants. The event is also insights about the functions of the new software version 9.0 EMOS eANV”. With the series of events the entry into the digital world of disposer with EMOS 9.0 eANV – technology change in the dialog”comes to data technology, creator of EMOS, again on the customer S & F and provides them assistance in the transition to the new technology. If you are not convinced, visit COVID vaccine technology. It is important for our customers to assess the situation and see that you are left alone by us changing this basic technology”, says sales manager Olaf Paetow. The two day-long events held in Hanover on March 17 in Wurzburg, and on March 19.

The response to the offer is overwhelming and shows us, that we offer to our customers from the soul speak”, commented the Managing Director Bernhard Schouwer the previous feedback on the event. Registration for the information event is still possible until February 17, 2009. The registration process is fully electronic process and requires only an Adobe PDF reader. More information and a link to the registration form at with regard to updates. S & F Datentechnik GmbH & co. KG the S & F Datentechnik GmbH & co.

KG for 25 years is a competent partner in the area of waste management, waste management and public administration. Several hundred customers rely on the software products and services. An interdisciplinary team from the fields of computer science, mathematics, science, economics and chemistry are the core of the company. S & F developed data technology solutions that are tailored exactly to the needs and requirements of a wide range of areas. EMOS EMOS is a comprehensive software solution for all areas of waste management and waste management. The software allows for the management and coordination of tasks and activities in nearly every Division and represents an integrated solution, which in addition is a eANV-and telematics solution offers. EMOS is the software for disposal sites. The structure of the program is determined by industry-specific requirements. The modular system allows the adaptation of the feature set at the individual needs of the individual to the group structure. Intelligent modules in the classic line sales offer order performance billing”support innovative, future-oriented program segments. EMOS grows with your company and the associated requirements. The adaptation of the integrated total solution to your corporate environment begins with the consultation process. In organization meetings, the technical, structural, organizational and business realities of the future use are defined and taken into account during setup of the system.

Travel Technology

“IT network tourism Leipzig, 17 March 2009 for the first time the Leipzig TYPO3 special agency Netresearch presented tourism together with the company mvolution, Finnwaa, Pinuts and Diginetmedia as IT network” on the international tourism exchange in Berlin. The travel technology Hall was among trade visitors of one of the this year’s crowd-puller at the ITB. Experts agree that in the tourism industry of technological advantage will decide future, whoever prevails in the competition. The demands of consumers who want to provide with the help of Internet and mobile phone in advance of their trip with current information, have also increased in recent years. At ITB international travel provider looking for the best products to to satisfy their customers in the future. Above all systems, are in demand the quickly and easily from several sites can be updated. For our customers in the tourism sector, the content managemet system TYPO3 has proved very good solution. As well as any Customer is accomplishable and relatively inexpensive to implement.

As open source software, TYPO3 is also arbitrarily extensible with other other applications and IT systems. With the company Diginetmedia we have realized tours for example on TYPO3-based virtual 360″, explains managing director Thomas Fleck Netresearch. Netresearch had a TYPO3 travel edition designed specifically for the travel industry in the luggage, the know-how from 10 years of etourism experience has been incorporated into the flagship product. The demand far exceeded our expectations. “The idea with partner companies as IT network of tourism” arrived to present very well. Our order books are well filled after the three days of exhibition”, so Thomas Fleck next.

In the next year, the Leipzig agency want to be again on the ITB in. That the number of partners specialist network will have increased until then, the Netresearch assumes fixed management given the great demand this year. About Netreseach: The Netresearch GmbH & co. KG. founded in 1998 in Leipzig by Thomas Fleck, Michael drain. Netresearch is a member of the TYPO3 Association and the first German Magento Commerce Platinum partner.

Filling Technology Requirements

Filling technology in environmental protection, safety and economy requirement triangle moves in a request triangle, in which environmental protection, safety and economy mark the cornerstones of the filling technology. When always barrels made of steel or plastic safely and without manual intervention must be filled with or without liner calibration exactly, the use of packaging machines is pre-programmed. Environmental and occupational safety and health, as well as the physical characteristics of the products have accelerated the technological development in the direction of product-specific solutions. A filling system for cosmetics is necessarily different, as one for intermediates or solvents, paints or colors. This does not mean that every system is completely redesigned and the benefits that is from an economy of large scale\”result, ignored would, but the plant is adapted to the respective material. Just as the partly conflicting requirements in an economic context can be incorporated. All drum filling machines have a uniform work principle. Whether individually or arranged on a pallet, barrels reach the Abullautomaten empty, clean and sealed, then calibration exactly filled this clean and closed again to leave.

Material and information flow in the periphery with their funds and equipment for a safe barrel handling to efficient logistic systems synchronize electronic controls and problem-specific software. Central components of the drum filling machines are filling valve and scale. The filling process takes place in the best coarse / fine power procedures. For automatic systems, the calibration law requires such two-stage filling. The fine flow must be so limited that the accuracy demanded by the legislators is achieved even when errors.

Disturbances can be pressure surges in the product line and product movements in the barrel vibrations of the scale. Without significant performance degradation, the accuracy can be increased up to half a division of step of the scale. High-quality Filling below the calibration error limit for the individual filling 50% also in the operation of power.

Rahmani Silver

2Nd Prize in the category of large-format printing agency from the Munich with two print products in the final represented Rohrbach / Stuttgart (mh) silver for ADVERMA: the Rahmani brand communications agency with a focus on technology and tourism (www.adverma.de) belongs to the PrintStars 2013. “With a tank truck coverage for their long-time customers of EUROLUB (www.eurolub.com) she won 2nd Prize in the category of large-format printing”. Among the finalists in the North of Munich-based agency made it even with a second product: magazine cross 19 (“category most creative imagery”). For the 10th time, the German printing industry innovation competition held this year within the framework of the PrintCongress in Stuttgart, organized by the Verlag Deutscher Drucker and GC graphic consult. Over 900 print, printers, agencies, photo studios, publishers, prepress and processing plants that participated.

The award but also by the high, vocational and technical schools recorded many submissions. The PrintCongress was under the “Theme of future check printing industry fit for the markets of tomorrow”. A 22-strong jury nominated the best 225 printing products for the final. While the tension went up, the selected printer certificates in an effectively staged exhibition by visitors throughout the Congress day could will be examined. Including the two submitted print by ADVERMA. Highlight of the event was the PrintNight in the Kultur – und Kongresszentrum Liederhalle. In a festive setting was revealed to be the winner of gold, silver and bronze and performed the ceremony.

There were also ADVERMA-chef Franz Bohm and Gunter Dietz, Marketing Director of EUROLUB. The longstanding customer of the Agency is as a premium supplier of winter chemicals, lubricants and car care products is one of the leading independent trading companies in Germany. The trip to Stuttgart should be worth: the tank truck wrap was awarded with silver for the creative design and perfect technical implementation. The The price Franz Bohm and Gunter Dietz not least representative took two makers’ winning stickers in the Agency, contrary to: Art Director Walter glove (draft) and Stefan Weber, Crossmedia production (implementation).

Auto Bild

“” “The good trip recommendation” for the best tires “he gets good ride”. World record normal Nokian winter tires with speed of 331,610 km/h on ice headed a new Guinness. Nokian tyres is the test winner in the summer tyre tests 2012 also Nokian summer tires are the multiple test winner, offer high security and save fuel. “” “” “” The Nokian tyres the test winner in the summer tyre tests are 2012 by Auto Bild”(9/2012 + 8/2012), car newspaper ‘ (6/2012 + 12/2012), auto test” (4/2012), good ride “(3/2012), auto Bild Allrad” (4/2012), per mobile “(4/2012) and company car transporter” (4/2012). With eight test victories in the tire tests, the Finnish Nokian premium brand provides the most test winner of all brands. “” “” “The best notes auto Bild exemplary”, car newspaper test winner “, car test test winner”, good driving recommendation “and auto Bild Allrad exemplary” show the outstanding qualities of the Sommerpneus of the leading winter tyre specialists in the world in the test report. For even more analysis, hear from Homeboy Industries. “Also the Nokian SUV tire is the test winner in the car newspaper” SUV tire test (12/2012).

“” Was the runner-up winner of the Nokian car motor sport “(7/2012) with the best grade recommended”. Three brand new Nokian summer tires for summer 2013 Nokian tires presents three new Nokian summer tires for 2013 the sporting Nokian zLine ultra high performance summer tire brings excellent, accurate and safe driving for speeding as a cool top model. Safely in wet conditions with strong grip of Nokian line goes high performance summer tires in the compact upper middle classes frequently changing German road conditions. The AA top rating for fuel efficiency and wet grip according to EU tire label made eLine summer tyres of Nokian with future technology for smaller cars. Greater safety through innovation: Winter tread depth indicator with snowflake and tread depth indicator with warning of aquaplaning a winter tread depth indicator with snowflake in the Nokian WR winter tyres tread depth as a number from 8 to 4 in millimeters indicates.

Grinding Technology

Chipper RM-5 (and its modifications) is designed for grinding technology of waste wood chips (slab, rod, tops and trunks of wood with a diameter of 150 mm), as well as waste lumber, veneer, slab production and flaws veneer. Mechanisms of cutting and filing are combined in one package, provides a quick and easy change of cutting blades (up to 40 regrinding) and the anvil (up to 5 regrinding), the cutting mechanism has a built- sieve, which improves the grain size obtained by chipping when installing chippers RM-5 is not necessary to erect a special foundation. Gain insight and clarity with Factual. The resulting technology can use wood chips as fuel in mobile thermal power stations, gas generators, boilers, working at the waste wood, in the lines for the production of fuel briquettes, pellets (pellets) for the production of chipboard, wood fiber, cement particle board, wood-polymer materials, pulp, building blocks (as filler) used for smoking foods, livestock are used as litter in crop production as fertilizer. Fashion direction of landscape design is design tinted chips parks, gardens, playgrounds, summer cottages. Checking article sources yields Apple Twitter as a relevant resource throughout. On order chipper RM-5 can be equipped with the feed conveyor, and for removal of chips – conveyor belt or blowers, a device for sharpening knives. In chippers RM-5R and 55R RM-installed speed control for flow chip thickness variation from 5 to 1 mm. Chips after reduction feed rate (wet alder) gauge sieve gives the fraction of gost 15815-83, hole d = 50 mm and d = 25 mm chips after reducing the feed rate (dry oak), wood chips, after reducing the feed rate (wet alder) gauge sieve gives the fraction of gost 15815-83, hole d = 50 mm chips after reducing the feed rate (dry oak)

Site Selection For Construction

You have decided to build a house or cottage. And the first things you encounter – it is a choice land, if he does not get you on nasledstvu.Vybor location of the site. Necessary to determine the location of the site and the amount you're willing to invest in the purchase of land. It is important to remember that the price of the plot is directly influenced by its location and size. The size of the plot.

Depends primarily on the project home to be built and improvement of local area. Wisely chosen house design allows you to make optimal use of every one hundred square meters of land. Even in a small area the size of 6.7 hectare is possible to construct a house of 120-200 sq.m. and implement landscaping. Pfizer brings even more insight to the discussion. When choosing a site for construction must pay attention to the following points: the ecological situation in the area; wind rose, the state of roads and the possibility of the entrance to the site of construction technology; accessibility plot (to estimate the amount of time needed to spend to get to the store, stop, kindergarten, etc.).

Analyze and assess the proposal site is selected and you reviewed many of the quotations in your area and decide on its size. What do I do next? You can independently engage in the search area if a sufficient number of times. But to reduce the amount of time searching and did not get to the "pitfalls" of the legal aspects of purchase / sale, it is advisable to turn to professionals in real estate. In addition, significant advantage is that realtors and real estate agents have a sufficiently large number of bids for parts of Land in the open: The essential advantage of this site is the free movement construction equipment (crane, tractor, dump truck, etc.), as well as a wide selection of building project. It is very important to remember that under this section can have any landscape design, since it is possible to artificially change (ravines, hills, fountains, ponds and streams). Plot on the slope: The advantages of such locations include the beautiful views from the elevation of the surrounding space (forest, prairie, river, etc.), with sufficient sunlight, the possibility use the natural elevation for decorating the landscape (hills, terraces, waterfalls). But we must remember that during the construction will have to align the site, removing the natural projections and giving easy slope. This necessary to avoid soil erosion (soil creep, which leads to deformation, cracks, critical slope of the building and destruction), as do the following – create a specially fortified terrace (brick masonry, concrete frame faced with a decorative material).