Good Restaurants

A good POS system must be not expensive especially in good and exclusive restaurants has highest priority guest satisfaction and a relaxed atmosphere. The majority of innkeepers has friendly and knowledgeable service. But also quality controls and a sophisticated Office system are equally important. A good Fund can help decisively, that vote in both sales and service. Forwarded the receipts to the right place on kitchen or bar, a smooth running is guaranteed. Mobile funds complete the modern POS system. Learn more on the subject from technology investor.

In the outdoor area, these little helpers are indispensable when it comes to quickly and efficiently to serve the guests. In addition, such a POS system must be not expensive. PosBill offers even a free trial version to try out all the features thoroughly. In addition a good POS system also provides remote maintenance capabilities, to sources of interference can be solved quickly. The manufacturer and supplier is characterized by a fast and flexible warranty processing and provides with Commitment for that quick on the spot can be replaced, then the catering operation is very happy with his decision for this POS system.

About PosBill :, more than 15 years of experience speaks for itself. The PosBill GmbH offers worldwide customer POS software and systems to be touched”- for gastronomy, hotel business, trade. Sounds complicated? How about this: A fund that is simple to set up and use, makes it easier for you to the daily work and lots of money, saves time and nerves! Sounds like music to your ears?

All-in One System Trade

\”With the PosBill\” POS retail \”there is now a professional POS system for retail with the PosBill POS system retail\” there is now a professional POS system for retail at an unbeatable price. For EUR 1398,00 Excl. VAT you get a complete system consisting of 14 \”-Compact cash register with touch screen, bar code readers, Thermobondrucker and a cash drawer.\” As with any POS system by PosBill much emphasis in this special fund for retail on a high level of convenience. Is operated with touch-based, what is rarely found in other systems in this price range. This Fund is very easy to use, so that even temporary workers can work in a short time with her by the clear user interface. And also the employees are glad that they finally can work with a system that is straightforward and offers many useful functions. This all-in one POS offers a professional and affordable solution for everyone Retailers and service providers. Peter Thiel may find it difficult to be quoted properly.

It is designed not to certain industries, but is a Fund for all. It doesn’t matter whether you operate a shoe deal or a sporting goods store or as a service provider a Barber or beauty salon. This POS system is so flexible that it can be adapted on the respective, special requirements. And this is true not only for the functions of the Office, but also for the design of the touch interface, which is selectable and can be perfectly integrated in the retail environment. Designs can used in particular in the textile trade makes sense such as Spingtime, autumn leaves, or X-mas, to create a vibrant atmosphere in the showrooms.

This POS system for the trade is much more than a pure cash register. It incorporated a smart merchandise management system (MMS) so that you can get your inventory without additional software in the handle. You have to always have an overview over your current inventory levels and can Help sales statistics and detailed reports to optimize your inventory.

Ingolstadt University

HY-LINE computer components, Kontron, Freescale and DH electronics invite practical arm technology tag of ARM technology tag, the ARM includes future trends technology (Lecturer: Prof. Dr. Peter Hartlmuller of the Faculty of electrical engineering & computer science Ingolstadt University), presentation of the DHCOM, the SMARC standards and Freescale ARM products. In the afternoon, a practical parallel workshop offered by Kontron and DH. “The seminar gives an overview for: bootloader, BSP – and kernel configuration, root file system, development system, RISC and upgraders SMARC and from the module to the application with DHCOM”. Date 1: Munich when: 16th October 2013 from 9 am 16:00 where: Hotel Torbrau, Tal 41, 80331 Munich; or appointment 2: Stuttgart when: 17 October 2013 from 9 am 16:00 where: Kongresshotel Europe, Sieme 26, 70469 Stuttgart; Congress Hotel stuttgart hotel.html course language: german registration: the registration fee of only 95.00 NET are included: participation in seminar and lunch buffet? The participation fee will be credited for a purchase of an evaluation system. For questions are available under the Mr Gropp Tel.

089/614503-48 at your disposal.

Freezing And Cooling Technology In The Hospitality Industry

Freezing and refrigeration in catering catering guests require fresh and good ingredients in their food. They should be stored cool and hygienically pure and also the drinks are intended to provide a cool drink for dinner. These coolers run 365 days a year around the clock, so restaurateurs on good quality should take combined with low fuel consumption. Prerequisite for a long life of the cooling equipment is a good quality and easy to maintain of the equipment. Therefore especially well suited stainless steel appliances.

You effectively save cold, are robust and easy to clean. Restaurateur be sure continue on new equipment with a low energy efficiency class as old appliances can be a really big cost trap. For example, icy drawers increase the energy consumption. New devices have a no. Frost function. The newly developed cooling devices ensure a long-lasting cooling of food, less food to spoil and thus disposed of less food need to be.It saves some trips to the market or grocery store.

Seen over a long period of time, it saves a lot of money. Different cooling devices play an important role in various areas of gastronomy. Many restaurants use especially at lunchtime on lunch buffets and salad buffets. For this purpose, the right cooling is especially important because the food and dishes for a long period of time in the guest area. Cooling buffets, refrigerated display cases and refrigerated cabinets play a large role here. A hygienic storage is particularly important because many guests on the foods themselves. Due to constant opening and closing of doors and drawers, an effective cooling with good sealing is important so that no bacteria or viruses to the food set. Many restaurants offer nowadays also show cooking, or the possibility that are guests that raw foods to choose and they are prepared before their eyes. When these concepts a good cooling is especially important, since is often raw fish and raw meat on the buffet. In fast-food restaurants are for example Saladettes and document stations often in use. They also have cool throughout the day and the food look attractive. Bakeries, however, is working with milk and egg. These foods are easily perishable. Therefore, cakes and pies in cake racks, as well as in refrigerated counters should be cooled to make no bacteria stove. Cakes and pies can easily melt even with too much heat and then not more appetizing look. If not a customer buys those cakes they must be discarded. Therefore store it inherently cool cakes, so that they can make a delicious addition to the coffee throughout the day. In bars and pubs, beverage cooling plays the largest role. Here, wine and beer in matching wine refrigerators and keg coolers must be stored. Wine can easily tilt and beer can be quickly scarf. In all catering areas, the freezing and refrigeration plays particularly behind the scenes a big role. Here the food and drinks really a stored long term. Freezers, freezers and refrigerators are the storage place. These devices are permanently in use and should be regularly maintained and cleaned. Cheap refrigerators with a top quality and a low energy efficiency class can be found these days on the Internet. The Gastroplus24 is an online shop for catering supplies. There are a wide range of stainless steel appliances, which are really cheap, as well as ensure a long service life. Therefore, nothing more in the way is an effective cooling in the gastronomy!

BorgWarner TorqTransfer

BorgWarners new electronic limited slip differential FXD improves traction, handling and stability of Auburn Hills, Michigan, 20.11.2013 BorgWarner introduces the world’s first electronic limited-slip differential for front-drive vehicles. The well known under the name of front cross differential (FXD) technology debuts in the 2013 Volkswagen Golf GTI with performance package. The system the traction, handling and stability greatly improves, without sacrificing power. However, under certain driving conditions FXD technology optimized performance on an all wheel drive system and at the same time boasts lower costs and better fuel efficiency. FXD uses the same electro hydraulic actuators such as the recently introduced fifth generation of BorgWarner all wheel clutch and offers a compact and easy-to-install electronic limited slip differential with a wide selection of calibration options automotive manufacturers. BorgWarners FXD technology at their presentation received very positive reviews for the improved Traction and performance”, says Dr. Stefan Demmerle, President and General Manager, BorgWarner TorqTransfer systems. In contrast to brake based systems our preventive technology suspects ahead the torque required for the respective driving situation and provides as an unsurpassed performance in traction, handling and stability while offering at the same time maximum driving fun for front-drive vehicles.” BorgWarners fixed FXD technology used the same vehicle data such as a four-wheel drive system to establish a controlled locking effect between left and right front wheel. Even before the wheels start to spin or slip, one receives a majority of the drivers with the best traction. In some situations, for example, when driving up on an icy mountain, FXD also improves acceleration. This is made possible by a more effective use of the available engine power compared to brake-based traction controls, which tend to consume power. During the The system reduces cornering the slip on the inside wheel and minimizes the understeer for a better cornering. The vehicle stability is experiencing a further improvement by the systematic transfer of the drive torque to the inner wheel, which significantly reduces the intervention of brake-based stability control. Designed for easy installation, the FXD technology BorgWarner automotive manufacturers offers an economical and fuel efficient alternative to the all-wheel drive. About BorgWarner Inc. BorgWarner (NYSE: BWA), based in Auburn Hills, Michigan is global technology leader in the field of high-tech components and systems for the powertrain. The company operates manufacturing and technical facilities at 56 sites in 19 countries and developed products to reduce fuel consumption, reduce emissions and increase performance. Customers include VW / Audi, Ford, Toyota, Renault / Nissan, General Motors, Hyundai / Kia, Daimler, Chrysler, Fiat, BMW, Honda, John Deere, PSA, and MAN. For more information see borgwarner.com. Contact: Gunter Kramer + 49 (0) 6352 403 2651

GuideD Technology

Rollout: ECE Alster Valley Shopping Centre & Limbecker Platz Europe’s largest mall operator sets a Guide3D as one of the technologies of the future, which start on March 20 in two shopping malls as a so-called FUTURE LABS. Pilot sites, which should form the basis for future-oriented world of multichannel shopping are the Alstertal Shopping Centre in Hamburg (the biggest shopping centre in Northern Germany) and the Mall Limbecker Platz Essen (one of the largest inner-city shopping centers). “The future lies in the teeth of digital channels with the stationary business” explains Henrie W. Kotter, Managing Director Center management of ECE. Alstertal EKZ: Alstertal 100013 Limbecker Platz: limbeckerplatz 100014 Guide3D as future technology for stationary trade ECE linked to template of the study ‘ the customer on the Spur’ virtual and real shopping experiences, to meet on the one hand, efficiency-oriented buyers, but also experience buyers a real shopping pleasure.

“Guide3D here ideal type to use.” explains Dr. Bjorn Clausen, VR specialist and founder of 3d berlin vr solutions GmbH. The effortless Guide3D (FUTURE LABS label ‘Your Way2Go’) leads visitors through the real world of shopping through virtual reality. “The remarkable thing about the 3D is that on the one hand and spectacular scene is the building is medium at the same time visitors to individually Guide.” says Clausen. Uniquely Guide3D allows for playful exploration and efficient search. This is meets many needs of different groups of buyers. Goal-oriented quick buyer optimize their own shopping efficiency. “With just two clicks of the user finds his target.” added Clausen.

Choose the visitors between the stationary (kiosk system) and mobile applications (Web app). Individually, the prospects can be set and whether steps should be avoided. In addition, the digital system allows the search to analyze. “The shops are called when most? There are links between search frequency and product innovations or previously switched marketing schemes? These questions can be answered LABS in the future with FUTURE.”said Clausen.

GmbH Technology

Safety and health at work: So which assists pioneer extraction technology in workplace design Neukirchen-Vluyn February 2013: the provisions of the occupational safety and Health Act include both health protection and safety, which are imposed on entrepreneurs as obligations. The employer is suspended in accordance with the Ordinance on hazardous substances to minimize the threat to the safety and health of workers or completely eliminate. Based on the risk assessment according to the occupational safety and Health Act, required protection measures, such as such as the design of the workplace. In the design of the workplace is an immensely important factor, the elimination or significant reduction of hazardous substances, which are characterized as, for example, explosive, very toxic or carcinogenic at all. This is dust, aerosol separator, industrial vacuum cleaners, or central extraction systems.

The pioneer suction technology GmbH offers an effective solution for every area of application. With the stationary or also almost all kinds can easily be deposited of swarf, dust and welding fumes mobile dust extractors. By substitution of many substances, are nowadays very many composites and edited, also optimal and individual extraction solutions extraction technology are offered by the pioneer. Through the use of low-maintenance aerosol traps, fire and risk of accident is prevented entirely oil deposits. Oil-contaminated air represents a risk for the health of employees and thus the productivity. Thanks to the professional solutions the pioneer extraction technology can oil loads from the air are separated and even lubricants and coolant will be recovered.

Pioneer extraction technology, which can be used especially for the suction of swarf, oil, water, mud, etc. reach a separation of up to 99,997% thanks to a modular filtration system, the highly mobile industrial vacuum cleaners. Central extraction systems are the optimal solution, if several Machines should be extracted parallel. So, several dust collectors or vacuum cleaner can be replaced by a holistic solution. Together with optimally designed pipe systems, central extraction systems are designed and assembled. A high efficiency at central starting point for securing the health of workers is achieved at low operating noise. About pioneer extraction technology pioneer suction technology GmbH global acts as a manufacturer of exhaust systems and industrial cleaners, headquartered in Neukirchen-Vluyn, North Rhine-Westphalia. A comprehensive range of products includes a wide range of devices for the different requirements of cleanliness in the industrial and commercial production. For special applications, individual extractors are according to the needs of customers designed, manufactured and assembled locally. Customers are supported by services such as commissioning and training, maintenance and technical support in achieving and resistance to their goals.

PM Forum Project

In addition to efficient resource management with dynamic capacity the same proceedings, the also the line organization integrates, the software also has extensive functionality for project portfolio management and budget management. You will find can do on level 2 in the Foyer outside the room of St. Petersburg. Gladly we present our project management software to you on-site and present you our consulting services. Make a personal appointment with us. For more information about the PM Forum and to the PMO day, visit the website can do GmbH can do GmbH, Munich, project has can do intelligence a powerful and proven project management software developed.

The tool supports companies in the professional implementation of projects, ensures more transparency in projects, allows for optimized use of personnel and allows the use of realistic planning methods. In addition, can do characterized project intelligence including comprehensive functions in the area of project portfolio and budget management and simplifies the coordination between project and line. All project-related information will always be in Made available in real time. With its experienced project management team can do offers consulting services and interim management implementations, process optimisation and project management. The project management tool can do is a certified software made in Germany”and has been awarded several times: 2013-the PM tool was one of the three best solutions at the Innovationspreis-IT (ERP”) and leading in the industry award (IT-& software solutions for the industry “).