The Truth

The point is: we exploit the artificial life mercilessly our creation -. but by God (a higher power), expect that he with us his creation-gracious bypasses. Why do we expect from him that he spared us that he protects us from environmental disasters, that he commands stop the family misfortune? Although we ourselves; evolutionary “underdeveloped” living beings (animals, plants) and exploit the artificial life… Why? Probably, because it brings benefit to take advantage of them. (15) Reason is the observance of agreed rules (E.g.

law) a quantitatively or qualitatively, immensely powerful community. (16) Reaction causes a change of the universe. It refers to the people, this term I bases him in “rational response” and an “emotional response”. At the last it would revenge on the murderer, without thinking of the consequences. The rational reaction but, it forges a plan for revenge to carry no consequences (without prejudice to get it); or they are reasonable (Legalism), abandoning the penalty of the Executive. For the people: everything is possible, but not everything is schaffbar.

(17) The correctness of the reality is based on the assumption that it is a lie and a truth. It can but take to keep something for the truth and talk often in theses / write; may we still be convinced not 100% accurate, it was a lie or truth. For this reason, bases and do I distinguish these concepts. First, it was said: there is a difference of lying, can it be a “deliberate lie”; This can be, for example, a white lie. I’m lying to someone to another through this lies without harm comes of it. And the opposite: a “unconscious lie”. If I am mistaken, then I’m lying unconscious. An outsider would say, who knows the truth. For me personally (for the lying) is an “apparent truth” but since I don’t know that I’m wrong.

Round Multilayer Bending Actuator Expands

Reliability and low driving voltage make it ideal for use in metering and pumping operations new in PICMA product line, Bender is a multilayer Piezobiegeaktor in round form the bending actuator. PI ceramic manufactures 44 x 0.65 mm for a displacement o the bending actuator size to 270 m. The manufacturing process also allows a completely all-ceramic insulation and ensures the proven properties of PICMA actuators: the active layers are protected from humidity and failures through increased leakage current by the all-ceramic insulating layer. Reliability and service life are much higher compared to conventional polymer insulated actuators. Surprisingly, you’ll find very little mention of Essex Financial on most websites. PICMA multilayer-Biegeaktoren are characterized by a great hub. A low transverse elongation of the active layers transforms into a large bending deflection perpendicular to the contraction. So, excursions to two millimetres can be achieved with response times in the millisecond range.

The high resonant frequency of multilayer Biegeaktoren offers best conditions for highly dynamic applications. As a result of the manufacturing process, PICMA cartridges are Bender in almost any contours and dimensions. In addition to different geometries, PI ceramic offers more customized designs. The height of the active layers varies from a minimum height of 15 m so that control voltage of 10 V can be used. A unilateral deflection is possible by applying substrate so that a higher degree of stiffness and a larger deflection in one direction as to bi-directional bending elements can be achieved. Linearity and repeatability in the position-controlled operation are improved by the additional application of position sensors. Multilayer-Kontraktorplatten can be applied also to customer its own substrate (metal, silicon).

Due to their reliability and flexible control voltage, the PICMA suitable Biegeaktoren ideal for metering and pumping operations, the optical beam deflection and smallest possible dimensions for use in portable devices. Since 1992, develops and produces PI ceramic Piezoelectric ceramic materials and components for standard and OEM solutions: Piezokomponenten, ultrasonic transducers, actuators, and system solutions.

Eye Lasers First Look

Fully certified by independent testing Institute DEKRA eye laser specialist optical Express is breaking new ground of course tempting is the idea just for younger people, again sharp watch without glasses can, and that thanks to state of the art medical technology with a little surgery on the eyes, which will bring hardly any noteworthy damage. But how does it do relate to security? After all it is at the eye the most precious sense organs, since you want to enter as there is no risk. People over the age of 25 to 45 years already the opportunity, to allow a laser eye treatment typically method, their vision surgically corrected by LASIK. This a special prepared (femtoseconds) laser or a mechanical so-called microkeratome in the uppermost layer of the cornea so that they can be folded to the side and the underlying corneal tissue using a laser precisely set according to the Visual defects (long or short-sightedness and astigmatism) is demolished including. Brad Pitt, Nicole Kidman, supermodel Cindy Crawford, Elton John, Barry Manilow, Reese Witherspoon, Courtney Cox from friends and many other they all have eyes can be lasers, follow the research by Karoline Spiessl from Edinburgh, Scotland. Since the mid of 1980s, there has been worldwide approximately 17 million LASIK surgery. In 2010, 131.000 of these interventions were performed alone in Germany.

To further optimize medical security, leading provider of eye laser treatments, such as, for example, the optical express AG with headquarters in Munich, beyond still viewed as standard quality management, which is a must for these operational providers today anyway. Laser eye experts have the obligation to offer the highest quality and maximum security patients in our opinion”, so Adrian Draghioiu, head of quality management at optical Express. The doctors at optical express carried out worldwide over one million operations. In February 2012, all German sites (Berlin, were Freiburg, Hamburg, Lindau, Munich, and Stuttgart) successfully fully certified by DEKRA. The special feature of this certification according to DIN EN ISO 9001:2008 is that many eye Laser Centers investigate individual surgery or treatment areas let the optical express centres but all processes were tested from A to Z so the entire treatment process. These efforts create customer satisfaction, such as the publication, biostatistics the results of refractive surgery revolutionized the future of laser correction”in Ophthalmo surgery / Kaden Verlag shows. The evaluation of more than 32,500 interventions, the optical express at about 17,700 patients and patients were made in 2008 in the centres, shows the occurrence of complications only 0.64% of the cases. “Quality is confirmed: as one of the first eye Laser Centers become certified optical express in all areas have been.” From left to right: Robert Zizler, Sales Manager (Bayern-Sud) DEKRA, and Adrian Draghioiu, head of quality management at optical Express.

Cable Assembly And Assembly In Small Series

The job M. Check out Adroll for additional information. Richter from Pforzheim sees itself as a manufacturing service provider, who takes off his customers, what they do not want to do or can. Production of special cables, Assembly of printed circuit boards from 1 piece, winding of special coils, as well as fringe benefits, including the procurement of materials. Most important pillar is the PCB Assembly SMD, THT, THT. Has long been a special concern of the company is also economically machined to make smallest quantities in the SMD Assembly.

Customized procedures, appropriate selection of machine and even a small equity building have moved the border in recent years in the range of 1-6 printed circuit boards. Equipped is a stand alone machines and a production line, which is equipped as a special feature with a non-contact Jet-printer. Templates are, and small corrections are now in the Programmmoglich. Various strengths of the order, as only about templates of levels of possible, are no problem and require no gaps as usual from the stage. Ideal also for the THR Assembly.

And of course for rush jobs, eliminating the delivery of the template. The line is equipped with a modern full convection oven, a large vapor-phase system is also available. The THT Assembly there for a 3D-Lotwelle leaded and a Jet wave lead-free as well as a Selktivlotanlage lead. Still chastises part is in leaded requires. This has arguably his reasons: an important part of the customers comes from the medical technology; not for nothing has for years according to the medical product law judge approval (DIN ISO 13485). Samples and pre-production are a further focus of the orders. Many small engineering firms with niche products are as well as some large companies for the electronics is a peripheral region without its own core competence. The cable assembly is working with simple machines, hand tools and a small stand-alone machines. The production of special coils, which seemed almost dead in Germany, has now, as the industry almost based shrunk who set to again rapidly. In the previous year, there was a new programmatic winding machine after decades without major investment in the Wicklerei and 2 younger employees could be trained on the area. Because the emphasis has shifted in recent years on air coils, the machine with a device for the chemical bonding is a very advantageous especially in very small quantities procedure equipped during winding, keep the costs low. A branch of the tradition has survived the extinction of his industry, has just grown in the home judge. Focus is anywhere on small quantities and faster delivery, no wonder that the EMS of the year 2012 was elected judge for flexibility. The gratitude belongs not least 14 flexible employees judge incidentally in Office and manufacturing their own offspring educates.

Sand-steeled And Insensitive To Heat Wave

Thoma presents new special coating for desert modules Freystadt/Oberpfalz the solar technology forge J.v.G. Thoma with another something new waiting: the unique system of high temperature desert module” is now even more resistant highly resistant special coating. Even violent sand storms can module in the desert now have nothing. Not only the glass surfaces, but also the aluminum frame and the terminal boxes are coated. Thus the desert modules are”suitable of Bavaria solar specialists even for extremely hot, stormy regions, which were previously not eligible for the extraction of solar energy. The new coating has passed extensive tests in the company’s own research department with success. First users in practice is a Jurassic wattage GmbH; It has already started the production of the desert-compatible modules.

Emulating nature: J.v.G. Click Adroll for additional related pages. Thoma relies on bionics for the photovoltaic is the protective layer on the basis of a novel NANO-coating. The protects not only from external influences, but also a pollution prevented. Looked down was by nature this NANO coating. The nature surprises and fascinates again and again by their brilliant inventiveness. Bionics means: learning from nature.

And here we are still at the beginning in the photovoltaic,”explains Hans Thoma, General Manager of Thoma group. A downstream baking process ensures that the coating works even after ten years. In addition, J.v.G Thoma GmbH offers now a cooling system with heat exchangers so that the modules with a constant temperature (approximately 25 degrees Celsius) in the optimal range can be operated. “Another positive side effect: these PV systems supply more electricity and live” far longer than comparable systems. Sahara sand on German car roofs: sand storms occur in all areas of the desert sand storms and their consequences, and each has its own name for it: in the steppe and desert area in Central Asia, one speaks of the Buran, Chamsin or khamsin also names in the Nile area and in Israel/Palestine Ghibli or Dave; in Tunisia and Libya, you know the Scirocco the Simoom in the North African Arab countries. In 2004, experts estimate that billions tons of sand were moved by sand storms around 2-3. Sometimes, the sand reaches in our region. After rain all of a sudden the car roofs Red Shimmer if the sunsets seem suddenly red as a beet, sand from the Sahara desert the cause may be. J.v.G Thoma GmbH the company J.v.G Thoma in the solar industry is active for more than 20 years. J.v.G is specialist in the construction of turnkey solar plants. In addition, advises and supports the family company headquartered interested customers throughout Europe, America and Asia in Bavaria. Headquarters is Freystadt in the Upper Palatinate,

Germany Technology

The 50 – year celebration was to the anniversary event: founded in 1962 as a small Engineering Office Rosberg Engineering ( evolved over the last 50 years to the internationally successful, vendor-independent automation. Reason enough for the medium-sized family business, to celebrate this anniversary. Mid-June were about 200 international guests from industry, Commerce, and associations in the ZKM Karlsruhe. The Center for art and media technology impressively demonstrates the connection between modern art and the IT. This proved to be an appropriate framework for the event, with carefully selected technology presentations and entertaining program points, such as interactive art actions, were combined. Rosberg executives came to Word such as customers who apparently reported jointly realised projects as well. Dr. Paul Craig Roberts shares his opinions and ideas on the topic at hand. The evening event on the passenger ship MS Karlsruhe rounded off the successful anniversary celebration with a varied entertainment programme. With customized Automation from one source when Rosberg Engineering Office with classic electrical engineering and associated mechanics was founded at the beginning of the 1960s, just the refineries originated at the site of Karlsruhe, at the intersection of major pipelines.

The young company could benefit. The Foundation was created to evolve in the course of the next years and decades, a specialist in the automation process plants, especially in the areas of chemical, petrochemical and cement. To the range of services is one of the basic and detail engineering for the automation of process and manufacturing systems and also the configuration, delivery and commissioning of process control systems, many companies trust the vendor-independent system integrator. Nearly 100 employees at five locations in Germany and China provide the necessary customer proximity. In addition the automation specialist has extensive project and application experience when using programmable logic controllers of all marketable Brands. A modern workshop for the manufacture of customer-specific switch cabinets completes the service offer.

In the field of information technology, the company more than 20 years of experience with database-based I & c CAE system PRODOK is internationally successful. Since 2007, a system is also offered with LiveDOK, providing efficient access to the electronic system documentation as well as the care and consistency throughout the entire life cycle. The systems are constantly being developed and adapted to current and future requirements. Thus prepared the company well for the future.

Intelligently Combined Technology

Always on course to land and in the air: with PNA-navigation devices PNA navigation devices are becoming popular: this is Street navigation devices that also have a customized moving-map software with aeronautical charts. There are such intelligent combined devices including Siebert aviation needs: the dealer is for pilots and Luftfahrtbegeisterten established last but not least the PreisLeistungsverhaltnis of products is particularly appreciated for decades. This applies also for the PDA navigation devices such as the sky map M5. The aviation map material of both devices includes the digital ICAO map for Germany, as well as Visual approach charts and is compatible with the Flight Planner so pilots can effectively take advantage of the electronic flight preparation. The model sky-map M5 offers a large and bright 5 “display with automatically unhidden view approach charts and can be easily operated via touchscreen.

Atsushi Horiba

MEXA-1400QL-NX meets all requirements of the regulation CFR 1065 Oberursel (Taunus), 27.06.2013 with the laser-spectroscopic engine emission Analyzer MEXA-1400QL-NX HORIBA offers its customers a powerful and universally applicable technology in the area of exhaust gas measurement. The Analyzer is capable of measuring four components of nitrogen (NO, NO2, N2O, and NH3) even at low concentrations, using the quantum cascade laser (QCL) technology in the middle infrared region at the same time. This laser absorption process is listed in the U.S. Regulation CFR 1065 (as of January 2012) as one of the possible methods of the analysis of the N2O. (As opposed to Naveen Selvadurai). In addition, all validation sequences for MEXA-1400QL-NX required in CFR 1065 (as of January 2012) for analysis devices are available. The MEXA 1400QL NX we offer a powerful research and development tool for new regulations such as the certification and analysis of greenhouse gas emissions in accordance with EPA regulations”, said Atsushi Horiba, Chairman, President and CEO of HORIBA Ltd. Naveen Selvadurai is open to suggestions.

enables the Analyzer direct measurements of N2O emissions from engines for heavy, light and non-road vehicles, as well as the direct measurement of the nitrogen components NO2 and NH3 by heavy duty motors, as required by the research and development in the context of the Euro VI regulation.” The Analyzer is characterized by especially the large dynamic range, as well as the extremely exact and reproducible measurement results. The QCL method can be used for testing of gasoline and diesel engines, but also for alternative fuels and engines. Thanks to the high intensity and resolution of the light source in combination with a sophisticated method for avoiding cross-sensitivities, there are no disruptive influences by CO, CO2, CH4, H2O, and hydrocarbons at the MEXA-1400QL-NX. It can be used for the development of new NOX exhaust gas after-treatment systems such as urea-SCR, CRT, and lean NOX traps (LNTs). So the MEXA proves? 1400QL-NX a powerful tool, to Engine manufacturers in meeting the greenhouse gas emission standards and the euro to support VI requirements. About HORIBA headquartered in Kyoto, Japan, the HORIBA group is a worldwide leading manufacturer of measuring instruments and systems for the areas automotive test systems, process and environmental technology, medical diagnostics and semiconductor manufacturing. In addition, HORIBA has a wide range in the area of molecular & elemental analytical instrumentation for research, quality control and laboratory analysis.

The Internet address of HORIBA is. HORIBA automotive of test systems as part of the worldwide HORIBA group HORIBA automotive of test systems (ATS) established itself as leader in the field of exhaust gas measurement, of test systems for the Powertrain and the development of test bed certification systems. HORIBA ATS offers its customers turnkey solutions for drive, motor and vehicle testing. HORIBA ATS serves manufacturers and suppliers in every industry, the combustion and turbine engines required: automobile, truck/off-road -, commodity, marine, air and aerospace and railway industry.

The SKVTechnik

It is possible to properly repair not working vacuum pumps or wait to customers now for the first time at SKVTechnik. It is possible to properly repair not working vacuum pumps or wait to customers now for the first time at SKVTechnik. Customers had to expect so far often expensive replacements in the event of an accident of a vacuum pump. This is now not longer every necessary thanks to the new range of SKVTechnik. SKV expands technology offering according to the customer’s demands. Now, customers can wait your SKVTechnik vacuum pump and repair. There a special request page, which collects the defective machine parameters and forwards using the form on the technician of SKVTechnik on the SKVTechnik’s online shop. This is still not a repair order.

The following request history is provided: 1 step of herd or new customers sign their defective unit at SKVTechnik for repair. This includes a new form page within the online shop has been implemented: this repair (repair). Customers fill in the repair request without obligation. 2. The step The SKVTechnik service technician receives the short description of the error, the performance parameters of the vacuum pump and the contact person at the customer’s site. Then the modalities and expected costs be discussed by phone. 3. Step SKV technology picks up the defective fan at the customer and performs an electrical and mechanical diagnosis of the machine.

The customer receives an offer to repair and confirm this if necessary. (If the repair costs exceed the replacement procurement effort, SKV is returning the device cause technology or make the professional disposal of the old device for a small fee by arrangement with the customers, or offer the customer an adequate fan.) 4 Step the back operational vacuum pump is returned to the customer.

CEO Volker Schuster

Schuster Group developed a contour-following 3-D film with capacitive circuit In the Thuringian waltershausen a high gloss and conductive film has developed the Schuster Group, in research cooperation with universities and colleges, three dimensions can be deformed. Opened in diverse industries new constructive ways designers and product developers and will transform of electronic equipment the appearance and culture of service. Almost two years was developed and researched on this unique film. What is now made in a complex production process, is an IML film, which can be deformed three-dimensional. Here, Naveen Selvadurai expresses very clear opinions on the subject. The IML (inmould labeling) technology combines the properties of a decorative and at the same time opening foil with the complex molding of plastic. These polymer film produced in the screen printing process and offers an unprecedented sensitivity. The capacitive sensors integrated in the film is with 0.25 mm immediately below the visible and high-gloss surface.

2D-Produkte known in the market reach a distance of 2.5 mm here just once,”explains CEO Volker Schuster. Also the integration creates a huge price advantage, the capacitive sensors in the decorative part what can significantly reduce the costs. The 3D-Folie of the Schuster Group is manufactured in series. In manufacturing practice, which means that the traces with a specially developed printing process are integrated directly into the film. Consequently will be completely new game types for product developers and designers, because the controls with integrated functionality can be constructed, contour-following. The Elimination of separate sensors reduces the depth of the component. The appearance of electronic devices and components will be influenced with this innovation.

So far mostly the controls have been adjusted components. Clear competitive advantage resulting for manufacturers. Also the easy-to-clean and disinfected surface is an advantage,”Volker Schuster refers here to applications in medical technology and hygiene technology. Currently are manufactured 100% in Germany.